There are two versions of the new HIB: one for the Kyocera KJ4A 600dpi UV cure ink printheads; and one for the Kyocera KJ4B 600dpi aqueous ink printheads.
| GIS Head Interface Board | Kyocera Printheads Supported | Ink Type |
| HIB-KY-KJ4A | KJ4A-TA 20kHz or KJ4A-RH 30kHz | UV Cure |
| HIB-KY-KJ4B | KJ4B-QA 30kHz or KJ4B-YH 40kHz | Aqueous |
The HIBs provide access to all standard printhead settings including temperature control, greyscale drop size mapping, voltage trimming and waveform upload and read back.
Almost any print resolution is possible, including native 600dpi x 600dpi; asymmetric e.g. 1200dpi x 600dpi; non-standard asymmetric e.g. 480dpi x 600dpi and interlaced e.g. 1400dpi x 1200dpi - using multiple printheads.
The HIBs also drive full rate binary and greyscale data and require a single 24V power supply to support the full operating voltage range of the printheads.
“The new higher frequency printheads from Kyocera printheads are very data hungry” commented Nick Geddes, CEO of GIS. “This is an increasing trend in the market and these new HIBs will be offered to customers in conjunction with our recently launched USB 3.0 Print Manager Board which increases data throughput up to 2,700 Mb/s.”
The new Kyocera HIBs are now shipping in volume. GIS is also developing a HIB for the 2-colour Kyocera KJ403T 300dpi aqueous ink printhead – this new HIB will be available early 2014.
___________________________________________________